GEAR SELECTOR
Gear selector
Build your setup
Set by your first answer
We suggest
The all-round setup
Skis / Half and half
Poles
Fixed length and a locked-in feel for hardpack landings, lift laps and the park. Skied by WeiTien Ho on the Freeride World Tour.
PRE-ORDER - SHIPS NOV 15This pole is a fixed length - pick one to add it.
At {height} we would run {length}. Change it if you like them shorter. This pole is a fixed length - pick one to add it.
Adjustable two-piece that covers lift days, side gates and full tour days without compromise. Right at home anywhere you can find snow.
Three pieces, clips to the pack before you drop in, built to survive a technical ascent. The pole for splitboarding and for objectives.
PRE-ORDER - SHIPS OCT 1Camera baskets come fitted as standard on this pole - nothing to add.
Resort days
A pole built for hardpack and lift laps, so the one you trust in the backcountry is not the one taking the beating all season.
PRE-ORDER - SHIPS NOV 15This pole is a fixed length - pick one to add it.
At {height} we would run {length}. Change it if you like them shorter. This pole is a fixed length - pick one to add it.
Three pieces that strap to the pack, for bootpacks and technical ascents where the pole above is the wrong tool.
PRE-ORDER - SHIPS OCT 1Camera kit
Ergonomic cap with integrated GoPro-style rails, so you can swap between helmet cam and follow cam with no extra hardware and no fumbling with bolts. The alternative to camera baskets, not an addition to them.
For vlogging, when the camera lives on the pole all season. Leave it mounted between follow cams, or plant the pole as a monopod for a static third-person angle.
Takes a 360 camera on top of the pole for face shots and follow cams, and has a 1/4 inch bolt so the pole doubles as a monopod.
This will not fit over the XL top cap on the T-BAR RS. Fine on the other poles, and fine if you are running one of each.
For XL follow cams and face shots. Gets the camera far enough out that the pole disappears from the shot.
The extender screws into the 360 and stills mount and will not attach without one. Add the mount above, or skip it if you already have one.
Grip and caps
An extended finger flange that gives your hand a natural stop point and stops you dropping poles with a loose grip. Just as useful raising risers on the skin track as it is on the way down.
The 360 and stills mount will not fit over this cap on the T-BAR RS. Fine on the other poles, and fine if you are running one of each.